Language
- English
- 簡體中文

PRODUCTS

L-TEL

Home

ICS Repeater

Classification:

Complete Equipment Series

Key words:

Complete Equipment Series

Active Module Series

Passive Device Series

Antenna Series

Related Products

Product Description

Product features:

(1).It has the characteristics of high gain and good coverage effect. Under the same antenna isolation degree, the gain of the whole machine can be increased by more than 10dB to achieve greater coverage.

(2).With self excitation automatic detection and elimination function, the requirement of antenna isolation can be reduced by more than 10dB, and a derrick can be used for receiving and transmitting antenna, so as to reduce installation difficulty and construction cost.

(3).The channel selective system has the function of noise suppression. The uplink uses time slot judgment to achieve the function of noise suppression. It active controls the uplink noise of each device independently and reduces the mutual interference of the uplink noise between devices, so as to reduce the impact of the uplink noise on the base station bottom noise.

(4).The GSM system has the function of automatic carrier frequency tracking, which is convenient for starting site and maintenance.

(5).The case adopts high heat dissipation design, special door lock, effective waterproof, moisture-proof and corrosion-resistant, and is competent for all-weather outdoor work.

(6).All nameplates are laser engraved, beautiful, clear and not easy to wear.

(7).Product categories are complete, and can be customized according to the special requirements of customers.

Product series: Truck communication ICS repeater (PDT, TETRA, iDEN, GoTa, GT800, 350MHz public security communication), 1.4G, 1.8G broadband truck communication ICS repeater, UHF, VHF intercom communication ICS repeater, railway communication ICS repeater (450MHz radio train dispatching series, GSM-R Series), 4G LTE ICS repeater, 3G band ICS repeater(WCDMA, UMTS, CDMA2000), 2G band ICS repeater(CDMA, GSM, EGSM, DCS, PCS) and other systems. Output power 0.5W (27dBm) to 60W (48dbm) is optional.

Product type:

Single system, double system, multi system, band selection type, frequency selection type, multi subband, bandwidth variable type, SISO type and MIMO type, etc.